- Road tested & verified complaint, found o-ring had rolled onto metal sleeving causing metal clip to bend when installed. Removed o-ring & metal clip, installed replacement o-ring & metal clip. Reassembled & corrected coolant level. Pressure tested cooling system (no leaks). Bleed cooling system & corrected coolant level. Re-inspected, no leaks found.
- Performed electrical draw test, found no draw after vehicle left undisturbed for 30+ minutes. Performed vehicle inspection & noted the following: ELECTRONICS- + Comand center not working due to internal power supply fault + Right outside mirror assembly wiring bad causing bulb failure message & heated mirror to not work ENGINE- + Check engine light activation needs smoke test to verify leak in emissions system + Oil filter housing leaking oil onto drive belt + Belt tensioner weak causing drive belt to come off of car + PCV covers leaking oil + Brake vacuum pump leaking oil + Vehicle shaking at stop light due to broken motor mounts SUSPENSION- + Thrust arms broken + Control arms & ball joints broken + Front sway bar end links broken + Perform alignment after repairing suspension DRIVE TRAIN- + TPMS light on due to bad sensors + Both front tires worn out at inside tread + Both front & rear flex discs broken + Both front c/v axles leaking + Transfer case leaking oil
- Front tires set to 28 PSI Cold, rear tires set to 33 PSI Cold.
Bethany K. gave our service a 5 star review on 5/19/2023